02-309832

This product has been discontinued.

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: Directional control on/off valves

Recommended replacement: 02-309835

Tools

Product specifications

Characteristic	Value
Actuation Identification	Solenoid A, Solenoid B
Actuation Type	Solenoid Operated
Actuator Identification	Flag with Standard Build as Per ANSI B93 9
Application	Die casting & foundry, Machine tool, Marine/Offshore, Press, Primary metal, paper, Test equipment & simulation, Turbine control (wind, steam, water)
Body material	Gray Iron
Build Orientation	Solenoid 'B' at port 'A' end of valve and Solenoid 'A' at port 'B' end of valve
Build Type	Spring centered
Coil Rating	110 Volt AC 50 Hz/120 Volt AC 60 Hz
Coil Type	1/2 inch NPT thread conduit box
Design code	60
Diode	None
Electrical connector	Flying Lead Coil with Instaplug Male and Female Receptacle and 1/2 In. NPT Thread Wiring Housing
Flow rate	40 l/min
Fluid Cleanliness	19/17/14 micron
Fluid compatibility	Petroleum Oils
Function	Directional Control Valve
Interface	ISO4401-03
Leakage	Standard
Light	No
Manual Override	None
Model Code	DG4V-3S-6C-M-FPBWL-B5-60-EN466
Performance	Standard
Pressure Rating	350 bar
Product Height	3.57 in
Product Length/Depth	7.87 in
Product Volume	52.82 in³
Product Weight	4.4 lb
Product Width	1.88 in
Reducer Module	No
Response time	18-32 ms
Seal material	Buna-N
Size	D03
Spool Center Condition	A Port and Double Offset sensing switch on B Port
Spool Monitor Switch	None
Spring Arrangement	C
Stage	Single Stage
Tank Port Rating	100 bar
Valve Mount Type	Subplate/manifold mounted
Wattage	30 W
Working temperature - max	70 °C
Working temperature - min	-20 °C