Danfoss logo
Danfoss-product-details

Danfoss

70160-RUC-03

ADB12R2FRA11LL1A0A00220A00000A0C
The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

Tools

Product specifications

Characteristic
Value
ApplicationMining Machinery, Dump Trucks Lift, Agriculture Tractore , Railroad Equipments Etc.
Auxiliary Port Side (C4 or C5) (Charge Pump Only)None
Auxiliary Port Top-Front (C1) or Bypass Valve.750-16 UNF-2B SAE O-Ring Port Plugged
Auxiliary Port Top-Rear (C2).750-16 UNF-2B SAE O-Ring Port Plugged
BrandDanfoss
Case Drain (D1 and D2).750-16 UNF-2B SAE O-Ring Port D1-Top (D2-Bottom Plugged)
ConfigurationSingle
Control ShaftWith Thru Cross Hole Diameter 6.35 [.250], Arm Diameter 17.32 [.682]; 113 [4.45] From Unit Centerline To Control Shaft End
Control Shaft LocationRight Side
Design codeC
Design typeNone
Displacement20.3 cm³/rev
Drive Shaft Seal ConfigurationSingle
FeatureEasy-to-operate sealed systemDisplacements: 20cc to 49cc (1.22 to 3.00 cu in)Flexible for multiple applications
Flow at Rated Speed and PSI64.3 l/min
Housing materialCast Iron
IdentificationStandard
Main Port Location AOpposite Sides
Main Port Location BOpposite Sides
Main Port OrientationRadial
Main Port(s)1.0625-12 UN-2B SAE O-Ring Port
Maximum Input Power42 kW
Maximum Input Torque119 Nm
Minimum Working Pressure5076 Psi
Model CodeADB12R2FRA11LL1A0A00220A00000A0C
Mounting Flange LocationStandard J744
Mounting TypeStandard
PaintRed Oxide Primer Per Spec 209-13A
Peak Pressure Rating5500 Psi
Product Height6.29 in
Product Length/Depth10.08 in
Product TypeMedium Duty Closed Circuit Pump
Product Volume564.288 in³
Product Weight21 lb
Product Width8.9 in
Rated speed - max3600 RPM
Shaft rotationRight
Special featuresNone
Sub-brandNone
Trade Name70160 Series
TypeVariable Displacement
Unit typeSingle
Valve PlateValve Plate- Type 2
Working pressure - max5076 Psi