Danfoss logo
H1 80cm3 Bent Axis Motor DIN Housing

MOTOR-VAR-DISPL H1B080

83005914

Model code: H1-B-080-A-A-M1-CA-N-A-RB-VS-AS-S-A-10-NP-054-N-00-NNN

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: H1B bent axis variable motors

Tools

Product specifications

Characteristic
Value
Description
SeriesH1H1 - Series
Product TypeBBent-axis variable motor
Frame Size080Displacement 80 cc/rev at maximum angle
A:RevisionAProduct version A of H1B series
Z:PortAPort configuration: inch according to ISO 11926-1
B:ControlM1Electric proportional 12V, Deutsch DT 04-2P connector, de-energized = minimum displacement, no pressure compensator override
C:PCOR,BPDCAWithout pressure compensator override and without brake pressure defeat, use with “M*” controls
D:Threshold SettingNNot applicable
E:OrificesA1.2mm diameter orifices M4 and M5
F:Endcap Type & PortsRBEndcap for proportional controls, side ports ISO 6162 Type 1 (metric), use with “M*” and “K*” controls
G:Flange & HousingVSSAE-flange motor housing (ISO 3019 / 1), with speed sensor port
H:Shaft & Speed RingAS14 tooth 12/24 pitch ANSI 92.1 1970 class 5, with speed ring
J:SensorSSpeed sensor, Deutsch DTM 04-6P connector, 4.5V to 8V
K:Loop Flushing Shuttle SystemALoop flushing, 6.5 bar shuttle shift pressure
L:Loop Flushing Relief Valve1010 l/min, non adjustable, 16 bar cracking pressure
M:Special Hardw FeatureNPStandard hardware feature proportional standard
N:Minimum Displacement054054 cc/rev minimum displacement setting
P:Maximum DisplacementN100% maximum displacement, non adjustable, use with "L*", "D*", "M*" &"K*"
Q:PCOR Setting00No pressure compensator override function, use with “L*”, “M*”, “E*”, “F*” and “H*” controls
R:Paint and NametagNNNDanfoss nametag

General specifications

Characteristic
Value
Proposition 65Cancer and Reproductive Harm