862AN00013A

KBCG-6-W160-Z-M2-3-A-PE7

This product has been discontinued.

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

Tools

Characteristic	Value
Actuation Identification	Solenoid A
Actuation Type	Solenoid Controlled
Application	Die casting & foundry, Machine tool, Marine/Offshore, Press, Primary metal, paper, Test equipment & simulation, Turbine control (wind, steam, water)
Body material	Cast Iron
Build Orientation	Solenoid at B Port End
Build Type	Spring offset
Check Valve	No
Coil voltage	24 Volt DC
Communication bus	None
Connector type	ELECTRICAL (PE7) 7 PIN ELECTRICAL PLUG WITH PLUG
Current	1.6 A
Customer Programmable	No
Design code	11
Diode	None
Feature	Simpler, faster and lower cost valve package installationReduced possibility of selection and installation errorsOptimized valve and electronics
Feedback Sensor	No
Feedback Type	4-20 Ma Current Feedback Signal, +/-10V Voltage Monitor
Flow rate	200 l/min
Fluid Cleanliness	17/15/12
Fluid compatibility	Anti wear petroleum oils and Non alkyl based phosphate esters
Function	Pressure Relief
Interface	ISO4401-05/NFPA D05/CETOP 5/NG10
Leakage	Standard
Light	No
Manual Override	None
Model Code	KBCG-6-W160-Z-M2-3-A-PE7-H1-11
Performance	High-Performance
Pressure Drop at Rated Flow	6 bar
Pressure Rating	350 bar
Product Height	7.74 in
Product Length/Depth	8.12 in
Product Type	Proportional Valves
Product Volume	194.831 in³
Product Weight	11.8 lb
Product Width	3.1 in
Reducer Module	No
Seal material	Buna-N
Spring Arrangement	No Spring
Stage	Single Stage
Sub-brand	None
Symmetrical Flow	Yes
Trade Name	KBCG-6 11 Design
Valve Mount Type	Subplate
Working temperature - max	70 °C
Working temperature - min	-20 °C