Product specifications
Characteristic | Value | Description |
|---|---|---|
| Series | H1 | H1 - Series |
| Product type | P | Variable pump |
| Frame Size | 053 | 53cc/rev max/variable displacement |
| S: ROTATION | L | Left hand - counterclockwise |
| B: Product Version | A | Product version A |
| Configuration of ports | A | ANSI O-ring boss port configuration |
| Control | N5 | Non-feedback proportional electric, 12V, angle sensor DTM04-4P, manual override |
| Orifices | C2 | P = none, A+B = 1.3mm, TA+TB = none |
| E: Displacement Limitation | C | No limiters automotive control/non-feedback proportional electric (nested springs) |
| G: Endcap Type | F2 | Twin port, code 62 metric 4 bolt flange, remote filter, high pressure relief valve only (use “J” pressure protection) |
| H: Mounting Flange | F | SAE B 2 bolt flange (for installation of pump, M12 screws and hardened washers must be used) |
| J: Input Shaft | G1 | 14 tooth, 12/24 |
| K: Auxiliary Pad | NN | No auxiliary pad |
| M: Protection Type Side A | J | High pressure relief valve only |
| M: High Pressure Sett Side A | 35 | 350 bar |
| N: Protection Type Side B | J | High pressure relief valve only |
| N: High Pressure Sett Side B | 35 | 350 bar |
| S: Charge Pump | N | No charge pump, external charge required |
| T: Filtration | E | External charge supply full flow filter (for no charge pump) |
| V:Charge Relief Pressure Sett | 26 | 26 bar charge pressure relief valve |
| Special hardware features | P1 | Automative control /non-feedback proportional electric/fan drive control valve plate |
| Paint and nametag | C08 | No paint, standard nametag, layout A |
| Y: Settings | NNN | Default, no special settings |
General specifications
Characteristic | Value |
|---|---|
| Proposition 65 | Cancer and Reproductive Harm |