PUMP-TANDEM, VAR DISPL CCW H1T045L
80002468
Model code: H1-T-045-L-A-N-B6-C1-B-E7-F-G5-NN-25-25-40-40-N-P-20-M3-NNN-NNN
This product has been discontinued.
The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.
If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: H1T tandem axial piston pumps
80002468
Product specifications
Characteristic | Value | Description |
|---|---|---|
| Series | H1 | H1 - Series |
| Product type | T | Integral tandem pump |
| Frame Size | 045 | 45cc/rev max/variable displacement |
| Rotation | L | Left hand - counterclockwise |
| Product version | A | Product version A |
| Second kit size | N | Default rear stage frame equal to front stage frame |
| B:Control | B6 | Forward neutral reverse, 12V motor Deutsch DT04-2P (front) + electrical displacement control, 12V Deutsch DT04-2P (rear) |
| E:Orifices | C1 | P = none, A+B = 0.8mm, TA+TB = none |
| Displacement limitation | B | Adjustable externally (electrical displacement control/forward neutral reverse control) |
| Endcap type | E7 | Same sided port O-ring high pressure relief valve only (E7) |
| Mounting flange | F | SAE B 2 bolt flange (for installation of pump, M12 screws and hardened washers must be used) |
| Input shaft | G5 | 15 tooth, 16/32 |
| Auxiliary pad | NN | No auxiliary pad |
| High pressure setting side A, front | 25 | 250 bar |
| High pressure setting side B, front | 25 | 250 bar |
| High pressure setting side A, rear | 40 | 400 bar high pressure relief valve |
| High pressure setting side B, rear | 40 | 400 bar high pressure relief valve |
| Charge pump | N | No charge pump, external charge required |
| Filtration | P | Remote full flow |
| Charge relief pressure setting | 20 | 20 bar charge pressure relief valve |
| M:Special Hardw Feature | M3 | System loop bypass |
| R:Paint and Nametag | NNN | Black paint, Danfoss tag A |
| Settings | NNN | Default, no special settings |
| Auxiliary pad | NN | No auxiliary pad |
| B:Control | B6 | Forward neutral reverse, 12V motor Deutsch DT04-2P (front) + electrical displacement control, 12V Deutsch DT04-2P (rear) |
| Charge pump | N | No charge pump, external charge required |
| Charge relief pressure setting | 20 | 20 bar charge pressure relief valve |
| Displacement limitation | B | Adjustable externally (electrical displacement control/forward neutral reverse control) |
| E:Orifices | C1 | P = none, A+B = 0.8mm, TA+TB = none |
| Endcap type | E7 | Same sided port O-ring high pressure relief valve only (E7) |
| Filtration | P | Remote full flow |
| Frame Size | 045 | 45cc/rev max/variable displacement |
| High pressure setting side A, front | 25 | 250 bar |
| High pressure setting side A, rear | 40 | 400 bar high pressure relief valve |
| High pressure setting side B, front | 25 | 250 bar |
| High pressure setting side B, rear | 40 | 400 bar high pressure relief valve |
| Input shaft | G5 | 15 tooth, 16/32 |
| M:Special Hardw Feature | M3 | System loop bypass |
| Mounting flange | F | SAE B 2 bolt flange (for installation of pump, M12 screws and hardened washers must be used) |
| Product type | T | Integral tandem pump |
| Product version | A | Product version A |
| R:Paint and Nametag | NNN | Black paint, Danfoss tag A |
| Rotation | L | Left hand - counterclockwise |
| Second kit size | N | Default rear stage frame equal to front stage frame |
| Series | H1 | H1 - Series |
| Settings | NNN | Default, no special settings |
General specifications
Characteristic | Value |
|---|---|
| Proposition 65 | Cancer and Reproductive Harm |