Product specifications
Characteristic | Value | Description |
|---|---|---|
| Accessory ready | Not required | |
| Accumulator with manual dump | Not required | |
| Air bleed | Not required | |
| Communication interface | Not required | |
| Containment tray | Not required | |
| Cooling | Not required | |
| Cooling | Not required | |
| Design | Low pressure(UP TO 3000PSI)sae | |
| Directional valve coil voltage | Not required | |
| Directional valve lights | Not required | |
| Drive size | Not required | |
| Filler/breather | H2O-gate | |
| Filter | 60 GPM, 5um, spin-on return | |
| Future expansions | TBD - future expansion | |
| Low level/temp switch | Not required | |
| Manifold w/rel or inline rel | P & T connections | |
| Manifold/valve size | D03 | |
| Motor | 5HP 230/460/3/60+190/380/3/50 | |
| Motor type | Gen. purpose VFD ready-700/300 | |
| Motor variable frequency drive | Not required | |
| Paint | Default-danfoss grey ral-7024 | |
| Pressure gauge/sensor | 0-3000 PSI | |
| Product Series | Pak plus | |
| Pump | 21.1 CC(1.29 CID) /Rev piston | |
| Pump controls | Piston adj. displacement stop | |
| Reservoir | 20 Gallon/76 liter | |
| Station1 dir or prop valve | Not required | |
| Station1 position1 stack valve | Not Required | |
| Station1 position2 stack valve | Not Required | |
| Station1 position3 stack valve | Not Required | |
| Station2 dir or prop valve | Not Required | |
| Station2 position1 stack valve | Not Required | |
| Station2 position2 stack valve | Not Required | |
| Station2 position3 stack valve | Not required | |
| Station3 dir or prop valve | Not required | |
| Station3 position1 stack valve | Not Required | |
| Station3 position2 stack valve | Not required | |
| Station3 position3 stack valve | Not required | |
| Station4 dir or prop valve | Not required | |
| Station4 position1 stack valve | Not required | |
| Station4 position2 stack valve | Not required | |
| Station4 position3 stack valve | Not required |