Product specifications
Characteristic | Value | Description |
|---|---|---|
| Accessory ready | Not required | |
| Accumulator with manual dump | Not required | |
| Air bleed | Not required | |
| Communication interface | Not required | |
| Containment tray | Size per reservoir selection | |
| Cooling | Not required | |
| Cooling | Not required | |
| Design | Low pressure(UP TO 3000PSI)sae | |
| Directional valve coil voltage | 120VAC 60HZ / 110VAC 50HZ | |
| Directional valve lights | Not required | |
| Drive size | Not required | |
| Filler/breather | Standard filler/breather | |
| Filter | 25 GPM, 5um, spin-on return | |
| Future expansions | TBD - future expansion | |
| Low level/temp switch | Not required | |
| Manifold w/rel or inline rel | 1-Station manifold | |
| Manifold/valve size | D03 | |
| Motor | 1.5HP 230/460/60+190/380/50 | |
| Motor type | Gen. purpose VFD ready-700/300 | |
| Motor variable frequency drive | Not required | |
| Paint | Default-danfoss grey ral-7024 | |
| Pressure gauge/sensor | 0-2000 PSI | |
| Product Series | System pak | |
| Pump | 3.3 CC(.20 CID) / Rev vane | |
| Pump controls | Standard control | |
| Reservoir | 5 Gallon/19 Liter | |
| Station1 dir or prop valve | 3P/4W spring center-closed | |
| Station1 position1 stack valve | Dual meterout flow control A&B | |
| Station1 position2 stack valve | Not Required | |
| Station1 position3 stack valve | Not Required | |
| Station2 dir or prop valve | Not Required | |
| Station2 position1 stack valve | Not Required | |
| Station2 position2 stack valve | Not Required | |
| Station2 position3 stack valve | Not required | |
| Station3 dir or prop valve | Not required | |
| Station3 position1 stack valve | Not Required | |
| Station3 position2 stack valve | Not required | |
| Station3 position3 stack valve | Not required | |
| Station4 dir or prop valve | Not required | |
| Station4 position1 stack valve | Not required | |
| Station4 position2 stack valve | Not required | |
| Station4 position3 stack valve | Not required |