Product specifications
Characteristic | Value |
|---|---|
| Accessory ready | (1) 1"NPT coupling w/downline |
| Accumulator with manual dump | Not required |
| Air bleed | Not required |
| CMM | PACSYS_SHPU_CTO_CMM |
| Communication interface | Not required |
| Containment tray | Not required |
| Cooling | Not required |
| Design | Low pressure(UP TO 3000PSI)sae |
| Directional valve coil voltage | 24 VDC |
| Directional valve lights | DIN 43650 plugs w/light |
| Drive size | Not required |
| Filler/breather | Standard filler/breather |
| Filter | 25 GPM, 10um, spin-on return |
| Future expansions | TBD - future expansion |
| Low level/temp switch | Low level/temp switch |
| Manifold w/rel or inline rel | 1-Station manifold |
| Manifold/valve size | D03 |
| Motor | 7.5HP 230/460/60+190/380/50 |
| Motor type | Gen. purpose VFD ready-700/300 |
| Motor variable frequency drive | Not required |
| Paint | Default-danfoss grey ral-7024 |
| Pressure gauge/sensor | 0-3000 PSI |
| Product family | Package systems |
| Product series | System center |
| Pump | 13. CC(.80 CID) / Rev vane |
| Pump controls | Standard control |
| Reservoir | 20 Gallon/76 liter |
| Station1 dir or prop valve | 3P/4W spring center-tandem |
| Station1 position1 stack valve | Dual meterin flow control A&B |
| Station1 position2 stack valve | Not Required |
| Station1 position3 stack valve | Not Required |
| Station2 dir or prop valve | Not Required |
| Station2 position1 stack valve | Not Required |
| Station2 position2 stack valve | Not Required |
| Station2 position3 stack valve | Not required |
| Station3 dir or prop valve | Not required |
| Station3 position1 stack valve | Not Required |
| Station3 position2 stack valve | Not required |
| Station3 position3 stack valve | Not required |
| Station4 dir or prop valve | Not required |
| Station4 position1 stack valve | Not required |
| Station4 position2 stack valve | Not required |
| Station4 position3 stack valve | Not required |