Danfoss logo
Danfoss Char-Lynn H series 2-Bolt A_side port aligned with speed sensor (RIGHT)

MOTOR-ORBITAL,H SERIES 35 [2.2], MH0022MA18AF16AN02AA00000AA00J

101-2842-009

Model code: MH0022MA18AF16AN02AA00000AA00J

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: H series motors, Danfoss orbital motor quick selector

Tools

Product specifications

Characteristic
Value
Description
Motor SeriesH Series
Valve systemSpool valve
Orbital gearwheel set typeGerotor
Motor Size35
Geometric displacement [cm3/r [in3/r]]36 [2.2]
Motor typeStandard
Motor functionStandard
Mounting flange type2 Bolt - A
Mounting flange dimension [pilot dia x height, bolt circle dia, hole [mm [inch]]]82.5 x 8.1, 106.4, 13.6 [3.25 x 0.32, 4.19, 0.54]
Shaft dimensionDia. 1 inch
Shaft KeyWoodruff key
Main port thread typeBSP
Main port styleSideport - aligned
Main port dimensionG 1/2
Drain Port DimensionG 1/4 - Spec. Component
Brake Release Port Dimensionn/a
PaintedYes
Paint informationPrimer, Black, Low gloss
Special features hardwareSpec. Component
Special Features AssemblyStandard
Dust sealSeal Guard
Shaft SealNBR - Standard
Seal Kit60573-000
Front bearing typeJournal bearing
Rear bearing typeJournal bearing
Orbital gearwheel setFree running
Check valve functionNo
Hydraulic valve functionNone
SensorSpeed, Hall effect, 15 pulses, M12 connector
PackagingNo data available
Name TagDanfoss name tag
Design code09
BrandDANFOSSDanfoss
Model Code 1MH0022MA18AF16AN02AA00000AA00J
Product height in3.870
Product height mm98.298
Product length in6.450
Product length mm163.830
Product width in5.270
Product width mm133.858
Sub brandCHAR-LYNNChar-Lynn