PROTOTYPE GR2 FIXED DISPL WITH PFD VALVE
11080930
Model code: S-N-P-2-K-S-/-017-R-N-01-BA-K1-B7-NN-D5-N-N-/-UDX-N-N
This product has been discontinued and is no longer available. At this time, there is no direct replacement product.
The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.
If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: GearMe aluminum gear pumps Group 2
11080930
Product specifications
Characteristic | Value | Description |
|---|---|---|
| D_SIZE GROUP2 | 2 | Group 2:from 3 to 28 cc |
| Displacement | 017 | Displacement 17 cc |
| Drive gear | BA | Taper 1:8 - M12 x 1,25 - Key = 4 CO01 |
| E_VALVE GROUP2 | K | Priority divisor flow with Dynamic Load Sensing |
| F_DRAIN GROUP2 | S | Inlet on body - Outlet on cover - drain on cover driven gear |
| Inlet size | B7 | 20x40xM6 |
| Mark position | N | Position Marking standard (on the top in relation to drive gear) |
| Mark type | N | Standard Marking |
| Mounting flange | 01 | Flange with pilot Ø36,5 mm and 4 holes for bolts |
| O-Ring, Inside Diameter | / | Slash |
| Outlet size | NN | Without inlet |
| Ports position | D5 | Distance from front flange = 45 |
| Project version | N | Standard Version of Project |
| Rear cover | K1 | Cover for pump per Priority divisor flow with Dynamic Load Sensing |
| ROTATION | R | Product with clockwise rotation |
| Screws | N | Screws standard |
| Seals | N | Standard seal |
| Slash separator | / | Slash |
| Valve setting | UDX | Setting flow divider, flow limitation and priority divisor flow with Dynamic Load Sensing, Flow Checked 5 l/min with oil ISO VG68 a°-50°C and pressure 200 bar |
General specifications
Characteristic | Value |
|---|---|
| Proposition 65 | Cancer and Reproductive Harm |