GEAR PUMP GR3 FIXED DISPL

111.25.270.0C

Model code: S-N-F-3-N-N-/-044-R-N-D7-SA-F1-BB-NN-ZZ-P-N-/-UKP-G-A

This product has been discontinued and is no longer available. At this time, there is no direct replacement product.

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: GearMe aluminum gear pumps Group 3

Tools

Product specifications

Characteristic	Value	Description
B: Displacement	044	Displacement 44 cc
C: Rotation	R	Product with clockwise rotation
D_SIZE GROUP3	3	Group3-from 16 to 90cc displ
D: Project version	N	Standard Version of Project
E_VALVE GROUP3	N	Without valve
E: Mounting flange	D7	Flange with pilot D.101,6 and 2 holes for bolts and special shaft seal BCC
F_DRAIN GROUP3	N	Standard or no drain
F: Drive gear	SA	Splined SAE J498-13T-16/32-Dp Class 1FIT - for flange SAE 'B' SC07
G: Rear cover	F1	Cover for pump+flow divider and relief valve on priority side+front ports 3/4 Gas on cover
H: Inlet size	BB	27x55xM8
I: Outlet size	NN	Without outlet
J: Ports position	ZZ	Port type Bx-Bx in the center of the body (B)
K: Seals	P	Two opposite shaft seal+shaft seal one lip:Butadiene,Acrylic,Nitrile+O-Ring seal:Butadiene-Acrylic-Nitrile Hardness 75 Shore LAD+LBZBR
L: Screws	N	Screws standard
M: Valve setting	UKP	Setting flow divider, flow limitation and priority divisor flow with Dynamic Load Sensing, Flow Checked 22 l/min with oil ISO VG68 a0°-50°C and pressure 100 bar
N: Mark type	G	Special FIAT OM Marking LCA
O-Ring, Inside Diameter	/	Slash
O: Mark position	A	Mark the product on the bottom in relation to the drive gear (LBS-LCA-LFR-LOV)
Slash separator	/	Slash

General specifications

Characteristic	Value
Proposition 65	Cancer and Reproductive Harm