GEAR MOTOR GR2 BIDIRECT FIXED DISPL
121.20.502.00
Model code: SNM2NL-/-6,0-B-6-L5-AD-LF-B5-B5-NN-N-N-/-NNN-N-N
This product has been discontinued and is no longer available. At this time, there is no direct replacement product.
The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.
If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: GearMe Group 2 aluminum gear motors
121.20.502.00
Product specifications
Characteristic | Value | Description |
|---|---|---|
| Displacement | 6,0 | Displacement 6,0 cc |
| Drive gear | AD | Taper 1:5 - M12 X 1.25 - Key = 3 ; shaft for bearings H=17 |
| Inlet size | B5 | 15x35xM6 |
| Mark position | N | Position Marking standard (on the top in relation to drive gear) |
| Mark type | N | Standard Marking |
| Mounting flange | L5 | Flange with pilot D.52 spigot diameter with O'Ring and 4 holes for bolts through the body (BCJ) |
| O-Ring, Inside Diameter | / | Slash |
| Outlet size | B5 | 15x35xM6 |
| Ports position | NN | Standard from catalogue |
| Project version | 6 | Short version (bearings H=17 mm) |
| Rear cover | LF | Cover for motor with side drain in horizontal axis M12x1,5 CBH (LLN - Dx) |
| ROTATION | B | Bidirectional |
| Screws | N | Screws standard |
| Seals | N | Standard seal |
| Single Stage Family | SNM2NL | Gr2 Bidir.Motor-Vert.drain |
| Slash separator | / | Slash |
| Valve setting | NNN | without setting |
General specifications
Characteristic | Value |
|---|---|
| Proposition 65 | Cancer and Reproductive Harm |