PUMP-TANDEM, VAR DISPL

4445195

Model code: MPT-044-D-C-2-A-G-NN-J-A-A-A-HJJ-DP-A-FF-J-C-A-A-HJJ-DP-A-FF-4-GUX-***

This product has been discontinued.

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: Series 40 M35 and M44 tandem axial piston pumps

Tools

Characteristic	Value	Description
Auxillary mounting pad	4	SAE B - (integral) 13 tooth (for use with gear pump)
Base displacement	044	44 cc/rev (2.65 cu in/rev)
Bypass valve, front pump	A	Bypass valve
Bypass valve, rear pump	A	Bypass valve
Charge pressure relief valve setting	G	14 bar (200 psi)
Charge pump displacement	A	None
Control orifice diameter, front pump	FF	None
Control orifice diameter, rear pump	FF	None
Control type, front pump	DP	Left side, Bobcat bracket
Control type, rear pump	DP	Left side, Bobcat control mounting bracket, lift bracket top left
Displacement, front pump	A	Full displacement
Displacement, rear pump	A	Full displacement
Filtration	NN	None - without charge pump
Front seal group	A	Shaft seal for manual displacement control-front section
Handle position, front pump	A	None
Handle position, rear pump	A	Not applicable
Input shaft	C	Tapered, 1 inch dia, 1.5 in/foot, square key
Product	MPT	Tandem pump
Rear seal group	C	Shaft seal direct displacement
Rotation and valve plate	2	Left hand (counter-clockwise)
Special features (non-hardware)	***	None
Special hardware features	GUX	GUX
Swashplate	J	3/4 inch square trunnion with 3/8-16 tapped hole
Swashplate group, rear pump	J	Swashplate group-3/4 square trunnion tapped
System pressure protection, front pump	HJJ	345 bar (5000 psi) / 345 bar (5000 psi) no bypass function
System pressure protection, rear pump	HJJ	345 bar (5000 psi) / 345 bar (5000 psi) no bypass
Type	D	35cc & 44cc product type

Characteristic	Value
Proposition 65	Cancer and Reproductive Harm