Danfoss
72400-SWV-04
This product has been discontinued and is no longer available. At this time, there is no direct replacement product.
The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.
72400-SWV-04
Product specifications
Characteristic | Value | Description |
|---|---|---|
| Application | Construction, Agriculture, Truck and Bus, Oil and Gas, and other mobile applications | |
| Auxiliary Port Top-Front (C1) or Bypass Valve | .750-16 UNF-2B SAE O-Ring Port Plugged | |
| Auxiliary Port Top-Rear (C2) | .750-16 UNF-2B SAE O-Ring Port Plugged | |
| Brand | Danfoss | |
| Charge Pump | 20.7 Cm3/R [1.26 In3/R] With 1.3125-12 UN-2B SAE O-Ring Port For Suction Inlet (S) | |
| Charge Pump Displacement | 20.7 cm³/rev | |
| Code Title | 49.2 cm3/R [3.00 in3/R] Servo Controlled Variable Displacement Pump | |
| Configuration | Single | |
| Control | Electronic Proportional Control without Electronic Driver, with fine hi-gain control metering, without wire harness | |
| Control options | None | |
| Design code | D | |
| Destroke Valve | No | |
| Displacement | 49.2 cm³/rev | |
| Drain Port Size and Location | 1.0625-12 UN-2B SAE O-Ring Port - Left (D1) & Right (D2) Sides, Both Sides Plugged; Thru Drain Into Rear Auxiliary Flange (D3) | |
| Drive Shaft Seal Configuration | Single | |
| Feature | Easy-to-operate sealed systemDisplacements: 20cc to 49cc (1.22 to 3.00 cu in)Flexible for multiple applications | |
| Flow at Rated Speed and PSI | 169 l/min | |
| High Pressure Relief Valve Setting Port A | 258.6 bar | |
| High Pressure Relief Valve Setting Port B | 258.6 bar | |
| Housing material | Cast Iron | |
| Identification | Standard | |
| Input Mounting Flange | SAE A | |
| Main Port Location A | Right Side | |
| Main Port Location B | Right Side | |
| Main Port Orientation | Radial | |
| Main Port(s) | 1.3125-12 UN SAE O-Ring Port | |
| Maximum Input Power | 102 kW | |
| Maximum Input Torque | 286 Nm | |
| Minimum Working Pressure | 5076 Psi | |
| Model Code | ACGRCAA9CEZ1MM0ET00000B000D | |
| Mounting Flange Location | Standard J744 | |
| Mounting Type | Standard | |
| Output Shaft | 9 Tooth 16/32 Internal, Diameter 15.88 [.625], Accepts Shaft Extension 31.8 [1.25] | |
| Paint | Black Per Spec 209-13B | |
| Peak Pressure Rating | 5500 Psi | |
| Product Height | 8.85 in | |
| Product Length/Depth | 13.24 in | |
| Product Type | Medium Duty Closed Circuit Pump | |
| Product Volume | 987.777 in³ | |
| Product Weight | 62 lb | |
| Product Width | 8.43 in | |
| Rated speed - max | 3600 RPM | |
| Shaft rotation | Right | |
| Special features | None | |
| Sub-brand | None | |
| Trade Name | 72400 Series | |
| Type | Variable Displacement | |
| Unit type | Single | |
| Working pressure - max | 350 bar |