PUMP-VAR DISPL, CW 90PV075

83007219

Model code: 90-R-075-CA-B-CD-60-E-3-C6-D-00-GFD-40-34-24-B010

This product has been discontinued.

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: Series 90 piston pumps EMEA, Series 90 piston pumps US

Tools

Characteristic	Value	Description
F: DISPLACEMENT LIMITATION	3	No Limiters
G: END CAP PORTS	60	side ports
H: CHARGE PUMP	D	17 cc/rev
J: AUXILIARY MOUNTING PAD	CD	SAE-C with 14 T coupling, 4 bolt adapter,(2) ½-13 UNC tapped holes for support of pump
K: CHARGE PRESSURE SETTING	24	24 bar
K: CHARGE PRS RELIEF	24	24 bar
L: SHAFT OPTIONS	C6	splined shaft , 21 teeth, pitch = 16 / 32
M: CONTROL	CA	Control Cover Plate
N: FILTRATION	E	pressure integral (short filter with John Deere logo)
P: HIGH PRESSURE REGULATION	B	Port A: fast response PL, up to 450 bar settings Port B: high pressure relief only, 460 to 520 bar settings
Series 90 Displacement	075	75 Cubic Centimeters per Revolution
Series 90 Product Line	90	Series 90
Series 90 Rotation	R	Clockwise (Right hand) Rotation
T: CONTROL ORIFICES	00	MDC (P) none (TA) none* (TB) none* (A) none (B) none
W: SPECIAL HARDWARE FEATURES	GFD	CP15+0,5° valve plate, special nametag format
X: DATA SHEET	B010	test conditions acc.to TS 320 = set MFV using FNR control 519187 with 1.6 mm tank orifice after test reassemble coverplate
Y: HIGH PRESSURE SETTING A	40	Port A = 400 Bar / 5800 PSI
Y: HIGH PRS SETTING PORT A	40	Port A = 400 Bar / 5800 PSI
Z: HIGH PRESSURE SETTING B	34	Port B = 340 Bar / 4930 PSI
Z: HIGH PRS SETTING PORT B	34	Port B = 340 Bar / 4930 PSI

Characteristic	Value
Proposition 65	Cancer and Reproductive Harm