Danfoss logo
H1 80cm3 Bent Axis Motor DIN Housing

MOTOR-VAR-DISPL H1B080

83039065

Model code: H1-B-080-A-A-T1-DA-N-B-TA-DN-JN-N-A-10-NN-030-Z-30-NNN

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: H1B bent axis variable motors

Tools

Product specifications

Characteristic
Value
Description
SeriesH1H1 - Series
Product TypeBBent-axis variable motor
Frame size080Displacement 80 cc/rev at maximum angle
A:RevisionAProduct version A of H1B series
Configuration of portsAPort configuration: inch according to ISO 11926-1
ControlT1Electric 2 position 12V, Deutsch DT 04-2P connector, de-energized = minimum displacement, with pressure compensator override
C:PCOR,BPDDAWith pressure compensator override and without brake pressure defeat, use with “P*” and “T*” controls
D:Threshold SettingNNot applicable
OrificesB0.8mm diameter orifices M4 and M5
F:Endcap Type & PortsTAEndcap for 2 position and pressure compensator controls, axial ports ISO 6162 Type 1 (metric), use with “E*”, “F*”, “T*”, “P*” and“H*” controls
G:Flange & HousingDNDIN-flange motor housing (ISO 3019 / 2), no speed sensor port
H:Shaft & Speed RingJNW40x2x30x18x9g DIN 5480, no speed ring
J:SensorNNo speed sensor
K:Loop Flushing Shuttle SystemALoop flushing, 6.5 bar shuttle shift pressure
L:Loop Flushing Relief Valve1010 l/min, non adjustable, 16 bar cracking pressure
Special hardware featuresNNStandard hardware feature 2 position standard
N:Minimum Displacement030030 cc/rev minimum displacement setting
P:Maximum DisplacementZ100% maximum displacement, non adjustable, use with "E*", "F*", "T*","P*" & "H*"
Q:PCOR Setting30Pressure compensator override pressure setting 300 bar
Paint and nametagNNNDanfoss nametag

General specifications

Characteristic
Value
Proposition 65Cancer and Reproductive Harm