Vickers by Danfoss KBS1-05 10 Design Proportional Valves AxisPro High Performance 852AN00024A (RIGHT)

KBS1-05-06-NS-11-H-NS-001-10 Valve

852AN00043A

This product has been discontinued and is no longer available. At this time, there is no direct replacement product.

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: AxisPro proportional valves

Tools

Product specifications

Characteristic	Value
A Port flow LPM	80.00
A Port flow USGPM	21.00
Actuation Type	Solenoid controlled
B Port flow LPM	80.00
B Port flow USGPM	21.00
Brand	Vickers by Danfoss
Build orientation	Solenoid at B port end
Coil voltage	24 Volt DC
Command input	+/-10V Command +/-10V feedback
Communication protocol	None
Current	3.7 amp
Design Series	10 Series
Electrical Connection	Electrical (PH7) as PE7 but with pin C used for enable signal
Feedback sensor	Yes
Fluid Cleanliness	17/15/12 micron
Fluid Compatibility	Antiwear hydraulic oils and non alkyl-based Phosphate Esters
Interface	ISO4401-05/NFPA D05/CETOP 5/NG10
Manual override	None
On board electronics	Yes
Performance	Servo
Pressure drop rated flow BAR	35
Pressure drop rated flow PSI	500
Pressure rating BAR	350
Pressure rating PSI	5000.00
Pressure rating PSI	5000
Product height in	5.700
Product height mm	144.780
Product length in	10.490
Product length mm	266.446
Product width in	2.740
Product width mm	69.596
Seal Type	Fluorocarbon
Special Features	None
Spool Type	P port blocked, A, B, T connected
Stage	Single stage
Symmetric flow	Yes
Tank port rating BAR	250.0
Tank port rating PSI	3600
Valve Mount Type	Line
Valve Type	AxisPro level 1
Working temp max C	70
Working temp max F	158
Working temp min C	-20
Working temp min F	-4