PUMP-VAR DISPL MPV046C

M46-20771

Model code: MPV-046-C-B-B-B-T-B-B-BA-G-A-BFF-CB-A-GG-A-NNN-***

This product has been discontinued.

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: Series 40 M46 axial piston pumps

Tools

Product specifications

Characteristic	Value	Description
S40_PRODUCT_RES	MPV	Variable pump
BASE DISPLACEMENT	046	46cc/rev (2.80cir)
TYPE	C	25cc product type
C: SWASHPLATE	B	Pressure balanced swashplate
D: SEAL GROUP	B	Shaft seal with electrical displacement control/hydraulic displacement control
E: INPUT SHAFT/AUXILIARY DRIVE	B	13 tooth 16/32 spline / 9 tooth 16/32 spline, A auxiliary
F: ROTATION & VALVE PLATE	T	Rotation counterclockwise, control pressure 15, 3 degrees, quiet
G: CHARGE PUMP DISPLACEMENT	B	13.99 cc/rev (0.85CIR) charge pump displacement
H: CHARGE PRS RLF VALVE SET	B	19.5 bar (280 psi)
J: FILTRATION	BA	Remote pressure filtration without bypass
K: DISPLACEMENT LIMITERS	G	46 cc/rev, with adjustable limiters both sides, both sides off centered
L: BYPASS VALVE	A	Bypass valve - no orifice
M: SYSTEM PRESSURE PROTECTION	BFF	250 bar (3625 psi) / 250 bar (3625 psi)
N: CONTROL	CB	Electrical displacement control, single coil, oil filled, Packard connector 2-pin, 16-90 mA
P: HANDLE POSITION	A	Not applicable
R: CONTROL ORIFICE DIAMETER	GG	Electrical displacement control/hydraulic displacement control/forward neutral reverse - supply=0.055, drain=0.055
S: AUXILIARY MOUNTING PAD	A	Aux flange SAE A, lift bracket side 2
T: SPECIAL HARDWARE FEATURES	NNN	None, black paint, Danfoss tag
ZZ: SPCL FEATURES (NON-HRDW)	***	None
Product	MPV	Variable pump

General specifications

Characteristic	Value
Proposition 65	Cancer and Reproductive Harm