PUMP-VAR DISPL MPV046C

80003797

Model code: MPV-046-C-B-B-H-T-B-J-AA-G-A-BJJ-DA-A-ZG-A-NNN-***

This product has been discontinued and is no longer available. At this time, there is no direct replacement product.

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: Series 40 M46 axial piston pumps

Tools

Product specifications

Characteristic	Value	Description
BASE DISPLACEMENT	046	46cc/rev (2.80cir)
Type	C	25cc product type
C: SWASHPLATE	B	Pressure balanced swashplate
D: SEAL GROUP	B	Shaft seal with electrical displacement control/hydraulic displacement control
E: INPUT SHAFT/AUXILIARY DRIVE	H	15 tooth 16/32 spline / 9 tooth 16/32 spline, A auxiliary
F: ROTATION & VALVE PLATE	T	Rotation counterclockwise, control pressure 15, 3 degrees, quiet
G: CHARGE PUMP DISPLACEMENT	B	13.99 cc/rev (0.85CIR) charge pump displacement
H: CHARGE PRS RLF VALVE SET	J	21.5 bar (310 psi)
J: FILTRATION	AA	Suction filtration with charge pump
K: DISPLACEMENT LIMITERS	G	46 cc/rev, with adjustable limiters both sides, both sides off centered
L: BYPASS VALVE	A	Bypass valve - no orifice
M: SYSTEM PRESSURE PROTECTION	BJJ	345 bar (5000 psi) / 345 bar (5000 psi)
N: CONTROL	DA	Forward neutral reverse, 12V, DIN 43650 connector
P: HANDLE POSITION	A	Not applicable
R: CONTROL ORIFICE DIAMETER	ZG	Electrical displacement control/hydraulic displacement control/forward neutral reverse- supply=0.046, no drain, A & B=0.028
S: AUXILIARY MOUNTING PAD	A	Aux flange SAE A, lift bracket side 2
T: SPECIAL HARDWARE FEATURES	NNN	None, black paint, Danfoss tag
ZZ: SPCL FEATURES (NON-HRDW)	***	None
Product	MPV	Variable pump
Product	MPV	Variable pump
Size/Dimensions		0.001

General specifications

Characteristic	Value
Proposition 65	Cancer and Reproductive Harm