KBHDG5V-7-2C150N85-X-M1-PE7-H4-20, KBHDG5V72C150N85XM1PE7H420

11360983

Model code: KBHDG5V72C150N85XM1PE7H420

This product has been discontinued and is no longer available. At this time, there is no direct replacement product.

The product is no longer available for purchase, but you can still find information about it, including service manuals, drawing etc.

If you're looking for a similar product, you can check out other options within the same product type by visiting the product type page.: Proportional directional valves

Tools

Product specifications

Characteristic	Value
A Port flow LPM	150.00
A Port flow USGPM	39.60
Actuation Type	Solenoid controlled pilot operated
B Port flow LPM	85.00
B Port flow USGPM	22.50
Brand	Vickers by Danfoss
Build orientation	Solenoid at B port end
Build type	Spring centered
Coil voltage	24 Volt DC
Command input	+/-10V Command +/- 10V feedback
Communication protocol	None
Current	3 amp
Design series	20 Series
Electrical Connection	Electrical (PE7) 7 pin electrical plug with mating half
Feedback sensor	Yes
Fluid cleanliness	17/15/12 micron
Fluid Compatibility	Antiwear hydraulic oils and non alkyl-based Phosphate Esters
Interface	ISO4401-07/NFPA D07/CETOP 7/NG16
Manual override	None
Maximum pressure BAR	350
Maximum pressure PSI	5000
Metering	Meter in / meter out
Model Code 1	KBHDG5V72C150N85XM1PE7H420
On board electronics	Yes
Performance	Servo
Pilot drain	External
Pilot supply	Internal
ProFX compatible	No
Reducer module	Yes
Reverse flow check	No
Seal Type	Viton
Special features	None
Spool Type	ISO4401-10/NFPA D10/CETOP 10/NG32
Stage	Two stage
Symmetric flow	No
Tank port rating BAR	350
Tank port rating PSI	5000
Valve Mount Type	Subplate
Valve Type	Proportional directional
Working temp max C	70
Working temp max F	158
Working temp min C	-40
Working temp min F	-40

General specifications

Characteristic	Value
Proposition 65	Cancer and Reproductive Harm