Product specifications
Characteristic | Value |
|---|---|
| Pump | Open loop pump |
| Displacement type | Variable |
| Series | W-series |
| Configuration | Single unit |
| Displacement | 250 ccm/rev |
| Basic standard | Metric |
| MOUNTING FLANGE | ISO3019/2-200B4HW |
| Rotation direction | Clockwise |
| Max displacement set | Max disp adj screw |
| Thru drive options | None |
| Main port | Sae port metric bolts |
| Main port orientation | Radial (side ports) |
| Main drive shaft end | ISO Straight key |
| Drive shaft seal config | Single shaft seal |
| Seal material | FKM with HP lubrication |
| Yoke position indicator | Visual indicator |
| Surface coating | Primer jet black RAL 9005 |
| Control type | Displacement adjustment prop… |
| Disp adj options | Proportional KCG relief valve |
| Electronic amplifier | No amplifier card / n/a |
| Yoke displacement zone | Single s.(dep. on control typ) |
| Additional functions | Press.+ power limiter override |
| Pressure control options | None (depends on control type) |
| Power control | kW at 1500 ppm |
| Pilot oil filter | None |
| V-valve_pilot oil sup | No venting valve |
| Position monitoring | Not applicable |
| Electric motor type | Not applicable |
| Control voltage | Not applicable |
| Customer adjustment | None |
| Special feature | None |
| Design Number | Per data spec. in D. table 40 |
| Model Code | PVWS-250M07R0001R01SKVADPJ00A5 |
| Brand | Danfoss |
| IPM FRAME SIZE | PVW-250cc Pump |
| Sub brand | Hydrokraft |