Product specifications
Characteristic | Value |
|---|---|
| Pump | Open loop pump |
| Displacement type | Variable |
| Series | W-Series |
| Configuration | Single unit |
| Displacement | 250 ccm/rev |
| Basic Standard | Metric |
| Mounting Flange | ISO3019/2-200B4HW |
| Rotation direction | Clockwise |
| Max displacement set | Max Disp Adj Screw |
| Thru drive options | None |
| Main port | SAE Port Metric Bolts |
| Main port orientation | Radial (side ports) |
| Main drive shaft end | ISO Straight key |
| Drive Shaft Seal Config | Single shaft seal |
| Seal material | FKM |
| Yoke position indicator | Visual indicator |
| Surface coating | Primer jet black RAL 9005 |
| Control type | Pressure compensator |
| Disp adj options | Not applicable |
| Electronic amplifier | No amplifier card / n/a |
| Yoke displacement zone | Single s.(dep. on control typ) |
| Additional functions | Load sensing |
| Pressure control options | None (depends on control type) |
| Power control | None/ n/a (depend. on control) |
| Pilot oil filter | None |
| V-valve_pilot oil sup | No venting valve |
| Position monitoring | Not applicable |
| Electric motor type | Not applicable |
| Control voltage | Not applicable |
| Customer adjustment | None |
| Special feature | None |
| Design number | per data spec. in D. table 10 |
| Model Code | PVWS-250M07R0001R01SVVADF000A1 |
| Brand | Danfoss |
| IPM FRAME SIZE | PVW-250cc Pump |
| Sub brand | Hydrokraft |