Danfoss logo
2000, Delta, 4000, 4000 compact, 6000, and 10,000 series motors-product-category

2000, Delta, 4000, 4000 compact, 6000, and 10,000 series motors

For continuous pressures up to 225 bar [3,250 psi] and displacements between 34 cm3 and 940 cm3 [2.1 in3 and 57.4 in3], Danfoss' portfolio of Char-Lynn disc valve motors provides a wide range of capabilities and many choices of output shaft, bearing assembly, port configuration, and mounting flange.

Features and benefits

  • Three-zone design for longer life and true bi-directionality
  • Bearings that meet the highest standards of the industry
  • Options to optimize performance in every application
  • Speed sensors
  • End ports
  • Proven reliability and performance in tough applications 
  • Compact design that maximizes power density 

Applications 

  • Skid steer attachments 
  • Harvesting equipment
  • Turf and forestry equipment
  • Snow removal
  • Sprayers
  • Trenchers
  • Grinders and mixers

To select from the full range of orbital motors, see the orbital motor quick selector.

 

Technical data

Char Lynn2 K 10 K Torque

Char Lynn2 K 10 K Speed

For more information, see Technical Information.

 

Products shown: 7

  • 2000 series single-speed motors category image

    2000 series single-speed motors

    The durable, reliable 2000 series motors provide torque up to 850 Nm [627 lb-ft] thanks to a proven design. The latest innovation in this series is our patented “Drive-in-Drive” technology that widens the range of available displacements, and many options are available to make these motors suitable for a wide variety of applications.

  • 2000 series two-speed motors category image

    2000 series two-speed motors

    Danfoss 2000 series motors are available with an integral two-speed feature that changes the displacement in a ratio of one to two and shifts the motor from a low-speed, high-torque (LSHT) mode to a high-speed, low-torque (HSLT) mode. The open-center selector valve shifts the speed mode from low to high when a pilot pressure of at least 6.9 dbar [100 dpsi] over case pressure is applied to the pilot port. In the high-speed mode, torque values are approximately one-half those of the conventional 2000 series single-speed motors, and speeds are approximately double.

  • Delta series motors category image

    Delta series motors

    The Delta motor provides torque up to 1,299 Nm [958 lb-ft] and many best-in-class features including its optimized Geroler, disc valve technology, and bearing capacity. An optional spring-applied, pressure-release parking brake offers a six-to-one mechanical advantage for dependable load holding.

  • 4000 series motors category image

    4000 series motors

    The 4000 series motors feature the same architecture as the industry-leading 2000 series motors, but they have a larger frame for higher torques and flows with continuous ratings up to 972 Nm [717 lb-ft] and 95 l/min [25 US gal/min], respectively.

  • 4000 series compact motors category image

    4000 series compact motors

    With an intermittent torque rating of 1,220 Nm [900 lb-ft], this compact disc-valve hydraulic motor provides the torque of a 4000 series motor from the envelope size of a 2000 series. A variety of mounting options include a pair of two-bolt mounts (SAE A, SAE B) and four four-bolt mounts (magneto, standard, and wheel mounts). For added flexibility, the motor can use the larger-size shaft of the 2000 series or the standard-size shaft of the 4000 series.

  • 6000 series motors category image

    6000 series motors

    With torque up to 1,685 Nm [1,250 lb-ft] and flow up to 150 l/min [40 US gal/min] continuous, this motor provides high power density and smooth operation.

  • 10,000 series motors category image

    10,000 series motors

    This is our biggest disc-valve motor, yet it still offers exceptional efficiency and side-load capability. In continuous mode, it provides high power with flows up to 170 l/min [45 US gal/min] and torque up to 2,700 Nm [1,993 ft-lb].