Product specifications
Characteristic | Value |
|---|---|
| Displacement | 391.7 cm3/r [23.90 in3/r] |
| Motor function | Standard |
| MOUNTING TYPE | 4 w p140 b184 h14 |
| Port Type | Sta 4 bolt split flange |
| Shaft Seal | NBR - Standard |
| Dust seal | Standard |
| Sensor | None |
| Packaging | Single pack |
| Name Tag | Danfoss name tag |
| Accessories | None |
| Brake Release Port Dimension | n/a |
| Case flow options | 7/16-20 check valve |
| Check valve function | Yes |
| Customer identification | None |
| Design Code | 06 |
| Drain Port Dimension | 7/16 - 20 UNF-2B SAE O-Ring port |
| Front bearing type | Tapered roller bearing |
| Geometric displacement [cm3/r [in3/r]] | 391.7 [23.90] |
| Geroler options | Tight fitting |
| Hydraulic valve function | None |
| Low pressure relief | None |
| Main port dimension | 0.750 inch drilled hole |
| Main port style | Sideport - staggered |
| Main port thread type | Manifold |
| Model Code | M06239AC02AB02000200000000000F |
| Motor Series | 6000 Series |
| Motor size | 390 |
| Motor type | Wheel |
| Mounting flange dimension [pilot dia x height, bolt circle dia, hole [mm [inch]]] | 139.7 x 7.9, 184.2, 14.4 [5.50 x 0.31, 7.25, 0.57] |
| Mounting flange type | 4 Bolt - Wheel |
| Orbital gearwheel set | Tight |
| Orbital gearwheel set type | Geroler |
| Output shaft type | Tap 1.75in |
| Paint information | n/a |
| Paint packaging | No paint |
| Painted | No |
| Pressure flow option | None |
| Product | Motor |
| Rear bearing type | Tapered roller bearing |
| Seal options | Standard |
| Series | 6000 series |
| Shaft Key | Square key, 7/16 x 1 1/4 inch |
| Shaft dimension | Dia. 1 3/4 inch, 1:8 SAE J501, 1 1/4 - 18 UNEF-2A thread in shaft end |
| Special Features Assembly | Standard |
| Special assembly instructions | None |
| Special features hardware | Standard |
| Valve system | Disc valve with valve drive |